Lietuviškai Rusiškai Rusiškai
Spausdinti

EP-BP

Product data sheet

Epoxy primer
Barrikade®

Product Description

Barrikade EP-BP is a solvent-free, two-component low viscosity clear epoxy resin and provides an impervious, hard and repellent finish with very good chemical resistance. Low odour and non flammable.

 

Areas of use

Barrikade EP-BP is intended for use as a primer and binder for screed.

 

Preparation

The surface should be free of laitance, oil and grease and loose or friable particles which may affect adhesion. Automatic shotblasting or scabbling is recommended. The surface should be vacuumed.

 

Mixing

Barrikade EP-BP is supplied in units ready to use comprising component A (Base) and component B (Hardener). The components must be mixed before use. Pour contents of B into A container and mix thoroughly for several minutes. Use gloves and goggles. Keep the components at room temperature 24 hrs before use.

 

Cleaning

Wash hands with special hand cleanser and thereafter with soap and water. Tools should be cleaned with solvents.

 

Health and Safety

Mandatory and recommended industrial hygiene procedures should be followed whenever reactive resins are being handled and processed. See safety data sheet.

 

Technical data

Product:            Two-component, solvent-free

                         clear epoxy resin

Density:            Approx. 1,07 g/cm³

Dry content:     100 %

Viscosity:         200 - 300 Cp at 25°C

Colour:            Transparent

Finish:              Gloss

Mixing ratio:    A : B = 2 : 1 parts by volume

Potlife:            30 minutes

Material   consumption:       depending on substrate and application.

Application temperature:  The product should not be applied at temperatures below 10°C.

Curing time:                     Initial curing 10 - 12 hrs at 20°C. Full cure 7 days.

Package:        13,5 lit. units and 6 lit. units

Storage/        Store at 10 - 25°C in dry

shelf life:      place and preferably in the

                     original container. At least

                     12 months.

 

The technical data presented here, as well as our instructions and recommendations, are based on numerous tests and on our experience. They are intended to assist the user in finding the most suitable working method and obtain the best possible results. Since the user’s working conditions are beyond our control, we cannot accept responsibility for the result the user obtains when using the product.

 

Whenever in doubt – please contact us!