Lietuviškai Rusiškai Rusiškai
Spausdinti

EW

Product data sheet

 

Epoxy paint

Barrikade®

Product Description

Barrikade EW is a water dilutable two-component epoxy paint, which provides a semi gloss finish with good chemical and wearing properties. Low odour and non flammable.

 

Areas of use

Barrikade EW is intended for use on concrete, cement and sand screeds and cementious renders in industrial premises, warehouses and showrooms with light and medium traffic.

 

Preparation

The surface should be free of laitance, oil, grease and loose or friable particles which may affect adhesion.

 

Mixing

Barrikade EW is supplied in units ready to use comprising component A (Base) and component B (Hardener). First thoroughly stir contents in B to a homogenous consistency. Pour contents of A into B container and mix thoroughly for several minutes. Use gloves and goggles. Keep the components at room temperature 24 hrs before use.

 

Application

Barrikade EW is applied with roller in minimum of two coats. The first coat can be diluted with 5 - 10 % water. A second coat is not diluted.

 

Material consumption approximately:

0,15 - 0,20 l/m² per coat.

 

Cleaning

Wash hands with special hand cleanser and thereafter with soap and water. Tools

 should be cleaned in luke warm water.

 

Health and safety

Mandatory and recommended industrial hygiene procedures should be followed whenever reactive resins are being handled and processed. See safety data sheet.

 

Technical data

Product:          Two-component water dilutable epoxy paint

Density:             Approx. 1,2 g/cm³

Dry content:      51 % by weight,

                         41 % by volume

Viscosity:          Approx. 4000 Cp at 25ºC

Colour:             See colour chart

Finish:               Semi gloss

Mixing ratio:      A : B = 1 : 1,4 by weight

                         A : B = 1 : 2,5 by volume

Potlife:                        60 minutes

Material           Approx. 0,15 - 0,20 l/m² consumption:   and coat.

Application     temperature:  The product should not be  applied at temperatures below 10C.               

Curing time:    Initial curing 6 - 8 hrs at 20°C. Full cure 7 days.

Package:          10 l units, 5 l units

Storage/shelf life:   Store at 10 - 25°C in dry place and preferably in the original container. At least 12 months.

                        

                       

The technical data presented here, as well as our instructions and recommendations, are based on numerous tests and on our experience. They are intended to assist the user in finding the most suitable working method and obtain the best possible results. Since the user’s working conditions are beyond our control, we cannot accept responsibility for the result the user obtains when using the product.

 

Whenever in doubt – please contact us!