Epoxy paint
Barrikade®
Product data sheet
Product Description Barrikade EW 60 is a water dilutable two-component epoxy paint, which provides a semi gloss finish with good chemical and wearing properties. Low odour and non flammable. Provides good colour stability, fast dry, and has a good hardness development. The product has a visible end of pot life, and contains no free amines. Areas of use Barrikade EW 60 is intended for use on concrete, cement and sand screeds and cementious renders in industrial premises, warehouses and showrooms with light and medium traffic. Preparation The surface should be free of laitance, oil, grease and loose or friable particles which may affect adhesion. Mixing Barrikade EW 60 is supplied in units ready to use comprising component A (Base) and component B (Hardener). First thoroughly stir contents in A to a homogenous consistency. Pour contents of A into B container and mix thoroughly for 3 minutes. Use gloves and goggles. Keep the components at room temperature 24 hrs before use. Application Barrikade EW 60 is applied with roller in a minimum of two coats. The first coat can be diluted with 5 - 10 % water. A second coat should not be diluted. Material consumption approximately: 0,13 - 0,17 l/m² per coat. Cleaning Wash hands with special hand cleanser and thereafter with soap and water. Tools should be cleaned in luke warm water. Health and safety Mandatory and recommended industrial hygiene procedures should be followed whenever reactive resins are being handled and processed. See safety data sheet. Technical data Product: Two-component water dilutable epoxy paint Density: Approx. 1,3 g/cm³ Dry content: 60 % by weight, 49 % by volume Viscosity: Approx. 2850 Cp at 25ºC Colour: See colour card Finish: Semi gloss Mixing ratio: A : B = 1 : 1,15 by weight A : B = 1 : 2,0 by volume Potlife: Approx. 1 hour at 20 ° C Material consumption: Approx. 0,13 - 0,17 l/m² and coat (75-100 microns). Application temperature: The product should not be applied at temperatures below 10°C. Curing time: Initial curing 3-5 hours at 20°C. Full cure 5 days. Package: 9,0 l units Storage/shelf life: Store at 10 - 25°C in dry place and preferably in the original container. At least 12 months. The technical data presented here, as well as our instructions and recommendations, are based on numerous tests and on our experience. They are intended to assist the user in finding the most suitable working method and obtain the best possible results. Since the user’s working conditions are beyond our control, we cannot accept responsibility for the result the user obtains when using the product.