Product data sheet |
|
Self laveling flexible polyurethane coating |
Barrikade PU-SLF 2K is a two-component solvent free self levelling flexible polyurethane. The product is considerable more UV-resistant than
Barrikade PU-SLF 3K, and is used as a top coat. The product is pigmented, and delivered in different colours. Barrikade PU-SLF 2K is water proof and very hard wearing.
User areas
Barrikade PU-SLF 2K is meant to be used as a top coat where there is a demand for flexible solutions:
· Parking decks
· Flexible under layer’s like asphalt and tree
· Comfortable flexible coating for people
· Membrane for outdoor constructions with big temperature changes, concrete or asphalt
Preparation
The surface should be free of laitance, oil and grease and loose or friable particles which may affect adhesion. Automatic shot blasting or scabbing is recommended. The surface should be vacuumed.
Mixing
Barrikade PU-SLF 2K is supplied in units ready to use comprising component A (Base) and component B (Hardener). The components must be mixed before use. Pour contents of B into A container and mix thoroughly for several minutes. Use gloves and goggles. Keep the components at room temperature 24 hrs before use.
Cleaning
Wash hands with special hand cleanser and thereafter with soap and water. Tools should be cleaned with solvents.
Health and safety
Mandatory and recommended industrial hygiene procedures should be followed whenever reactive resins are being handled and processed. The product contains isocyanates.
See safety data sheet for further instructions.
Technical data
Product: |
Two-component polyurethane |
Dry content: |
100 % |
Density: |
1,37 g/cm3 |
Viscosity: |
1400 cP |
Mixing ratio: |
A : B = 4 : 1 (weight) A : B = 3,45 : 1 (volume) |
Colour: |
Various |
Potlife: |
20 minutes at 20° C |
Curing time: |
3 hours at 20° C |
Coating intervals: |
4-6 hours a 20° C |
Minimum temperature: |
5° C |
Fully cured: |
7 days at 20° C |
Packaging: |
20 kg |
Storage: |
12 months in unopened package at 5-25° C |
The technical data presented here, as well as our instructions and recommendations, are based on numerous tests and on our experience. They are intended to assist the user in finding the most suitable working method and obtain the best possible results. Since the user’s working conditions are beyond our control, we cannot accept responsibility for the result the user obtains when using the product.
Whenever in doubt – please contact us!